Fibreglass triangular V7 Sport style side panel. Supplied unpainted, undrilled and without fixings. Ideal for the home special builder

Designed for early Tonti frames but may fit other models after appropriate modifications have been made. Two panels required per bike

 3 in stock

Small and large rubber pipes for connecting crankcase breather spigots to breather box

Guzzi part ref. 14157400 & 14157500

 3 in stock

14157500-z 14157500 GU14157500 14 15 75 00
 1415 7500 1415.7500 14.15.75.00

Combined LED brake and tail light bulb (21/5W equivalent) for tail lamps. LED bulbs last longer than tungsten (up to 50000 hours), are not affected by vibration and are therefore less likely to leave you exposed on a dark night without a tail light. LED reaction time is also quicker making these a sensible upgrade to your standard bulb

This is a single white LED lamp for tail lights with a red lens. NB Not approved for road use

 3 in stock

Gasket for drive box. 2 required.

 3 in stock

 12350700 GU12350700 12 35 07 00
 1235 0700 1235.0700 12.35.07.00

Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.

Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions. Suitable for all models originally fitted with points which have a mechanical advance / retard . Can also be fitted to Strada 1000, Spada 3, Cali 3 etc... if the distributor is swapped for a points type part with advance / retard mechanism. Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101

Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:

1. An ADAPTOR plate which mounts the lamps supplying the beam of infra-red light. This is broken by the ROTOR as it rotates on the engine cam or crankshaft. When a beam of light is re-made as the rotor blade clears the beam the switching unit is instructed to fire the coil (please note some systems will have separate mounting plates for each lamp and will not be assembled on a single plate as shown.) In many kits these are supplied as 1 lamp per cylinder. Other kits use a wasted spark system with 1 lamp firing 2 cylinders. The adapter kit also includes the parts needed to fit the lamps around the motorcycle cam or crankshaft - usually supplied as a base plate and /or segment plates with pre-mounted lamps.
2. A ROTOR which fits on the bike cam or crankshaft and makes and breaks the lamps infrared beam when the coil is to be fired. The rotor may be made of metal or a heat and solvent resistant plastic.
3. A SWITCHING UNIT which collects coil firing instructions from the rotor traversing through the lamps and fires the coil. The switching units are supplied positive or negative earth depending on the bike configuration and have a separate switching channel for each lamp in the Adaptation Kit. 12V and 6V versions are also available especially for earlier bikes. The switching unit has an integral timing light for each coil and is fully compatible with existing systems to the older design. It is also a direct replacement for Piranha switching units.
4. An INSTALLATION WIRING LOOM is supplied with each kit, tailored to the original bike loom dimensions, connectors and wire colours for a quick, easy and professional looking installation.

 3 in stock

Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

 3 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

12v long lasting bayonet LED bulb used for instrument backlighting and pilot / side light. Can be used in place of Guzzi ref. 3450119 and 10744910

12 volt, cool white

 3 in stock

 17762150 GU17762150 17 76 21 50
 1776 2150 1776.2150 17.76.21.50

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 3 in stock

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 3 in stock

Premium softstyle royal blue T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 3 in stock